- 7” Color LCD Display
- 8GB internal memory, SDHC to 32GB
- 20mV to 100 Vdc & 1-5 Vdc full scale ranges
- Thermocouples: K, J, E, T, R, S, B, N, C, RTD
- 4 Pulse or Logic inputs, 4 alarm outputs
- 10ms to 1H sample intervals & ext. sample
- Independent start / stop triggers & ext. trigger
- Independent input type, alarm, trigger & EU scaling per channel
- Record to GBD or CSV file format
- USB 2.0 computer & Ethernet interfaces & optional Wi-Fi capability
- GL28-APS or GL-Connection SW GUI & G-Remote capable
GL860 Isolated multi-channel loggerGL860
Isolated/ Universal input, Expandable Multi-Input Datalogger midi LOGGER GL860. Suitable for temperature measurement with multiple channels
| tem | Description | |
| Number of analog inputs | Maximum 200ch available for 1 terminal(20ch/30ch) or extension unit | |
| External input/ output ※1 |
Input | Trigger or Sampling (1 channel), Logic/Pulse (4 channels) Voltage range ：0 – ＋24V（common ground） Input signal: No-voltage contact (a-contact, b-contact, NO, NC), Open collector, Voltage input |
| Output | Alarm (4ch) Output signal: Open collector (pull-up to 5V by 10kΩ resistor) |
|
| Sampling interval | 5ms – 1h（5ms – 50ms is available for voltage and humidity, Number of channels is limited, external※1 | |
| TIME / DIV | 1s – 24h | |
| Trigger function | Repeat action | Off・On |
| Trigger type | Start: Data capture starts when a trigger is generated. Stop: Data capture stops when a trigger is generated. |
|
| Trigger setting | (Start / Stop) Off, Level, Alarm, External, Time, Date, Week |
|
| Alarm function | Alarm judgment mode | Detection method: Level, Edge Analog channel judgment mode: H (↑), L (↓), Window In, Window Out Logic channel judgment mode: H (↑), L (↓) Pulse channel judgment mode: H (↑), L (↓), Window In, Window Out Calculation channel judgment mode: H (↑), L (↓), Window In, Window Out |
| Pulse input | Measurement mode | Rotation count (RPM) mode Accumulating count mode Instant count mode |
| Maximum number of pulse inputs | Maximum input frequency : 50kHz Maximum number of count : 50kC/sampling (16-bit counter) |
|
| PC I/F | USB2.0 (Hi-speed), Ethernet (10BASE-T / 100BASE-TX), Wireless LAN(using B-568 option) * B-568 is available in limited region. |
|
| Storage device |
Internal | Built-in 8GB Flash Memory *2 |
| External *3 | One SD card slot (Support SDHC memory card, up to 32GB) *2*3 | |
| Saved contents | Setup conditions Measured data Screen copy |
|
| Operating environment | 0 to 45 ºC, 5 to 85 % RH (0 to 40°C when operated in batteries/15 to 35°C when a battery is charging) |
|
| Power supply | AC adapter | AC100 – 240V / 50 – 60Hz |
| DC input | DC8.5 – 24V (Max. 26.4V) | |
| Battery pack *Optional item | DC7.2V (2875ｍAh) (*Two packs can be mounted) | |
| Power consumption | 36VA or lower (When using the AC adapter, the LCD is on, During recharging battery, AC100V) |
|
| Vibration- tested conditions | Equivalent to Equivalent to Automobile parts Type 1 Class A Buzzer | |
*1. Input/Output cable for GL (option B-513) is required.
*2. Each recorded file is limited to 2GB.
*3. When the wireless LAN (B-568, optional item) is installed, the SD memory card cannot be inserted into the SD CARD slot.
